Is it time to replace your sensor?

FOR IMMEDIATE RELEASE

Macurco Commercial Detector Sensor Life

Sioux Falls, SD – October 2024

Regularly checking the sensor life on your gas detector is crucial for safety. A functioning sensor is vital for detecting harmful gases; if it’s expired or failing, it may not identify leaks, putting you at risk. Sensors degrade over time, leading to false readings, so checks ensure reliable gas level data. Compliance with safety regulations is also important, as many environments require operational gas detection systems. Additionally, timely sensor replacements can prevent costly repairs or accidents from undetected leaks. Overall, ensuring your gas detector is in good working condition provides peace of mind and enhances safety.

Macurco Quick Reference Sheet (PDF)

Please see below for what Macurco commercial products need replacement sensors.

CX-6/CX-12: 4-5 year sensor (Please note when this unit was purchased. If after February 21, 2024 (Lot 24B22XXXX) the unit will have a 4-5 year sensor. If purchased before February 21, 2024, the unit will have a 2-3 year sensor life). Click here to check the firmware version of your unit.

TX-6-ND/TX-12-ND: 2-year sensor

TX-6-HS/TX-12-HS: 2-year sensor

TX-6-AM/TX-12-AM: 2-year sensor

OX-6/OX-12: 2-year sensor

*Calibration is required when replacing the sensor in your Macurco detector. Please see the example replacement sensor and calibration videos below.

Macurco Commercial Calibration Flyer

Please see below for what Macurco commerical products need an entire replacement unit.

CM-6/CM-12: 10-year sensor

GD-6/GD-12: 5-year sensor

CD-6MC/CD-12MC: 15-year sensor

CD-6G: 15-year sensor

CD-6B: 15-year sensor

Checking the sensor life on your gas detector is crucial for several reasons:

Safety: A functioning sensor is essential for detecting harmful gases. If the sensor is expired or failing, it may not accurately detect gas leaks, putting you and others at risk.
Accuracy: Sensors degrade over time, which can lead to false readings. Regular checks ensure you’re getting reliable data about gas levels.
Compliance: Many workplaces have regulations requiring functional gas detection systems. Keeping your sensors in check helps ensure compliance with safety standards.
Cost Efficiency: Replacing sensors on schedule can prevent costly repairs or accidents that might occur from undetected gas leaks.
Peace of Mind: Knowing your gas detector is in good working condition helps you feel secure in your environment.

Overall, regularly replacing the sensor on your gas detector is not just about maintaining equipment; it’s about ensuring a proactive approach to safety and risk management.

About Macurco Gas Detection

Macurco Gas Detection designs, develops, and manufactures a full set of fixed and portable gas detection monitors to protect workers, responders, and the community. Macurco has more than 50 years of proven gas detection experience in residential, commercial, and industrial gas monitoring. Macurco gas detection systems (HVAC, Fire & Security, AimSafety, and TracXP) are widely recognized by distributors and users for their high performance and consistent reliability.

Macurco is based in Sioux Falls, South Dakota. Learn more at www.macurco.com.

For more information about Macurco products, applications, or gases, please get in touch with Macurco at 877-367-7891 or email us at [email protected].